Every Car Needs the AstroAI S8 Air Jump Starter with Air Compressor

AstroAI S8 Jump Starter with accessories.
AstroAI S8 Air Jump Starter with Air Compressor

A must-have device for every vehicle emergency kit.

What we like

  • Multi-function
  • Up to 20 jumpstarts on a charge
  • Fast inflation
  • Compact size
  • Bright screen

What we don’t like

  • Air hose is extremely short
  • Could use a handle

Driving is dangerous enough without worrying about low tire pressure, a dead battery, or breaking down in the dark. The AstroAI S8 Air Jump Starter with Air Compressor is the essential car accessory to help you when things go wrong. I recently had the chance to try this compact multipurpose tool.

This is a sponsored article and was made possible by AstroAI. The actual contents and opinions are the sole views of the author, who maintains editorial independence, even when a post is sponsored.

No Need to Carry Multiple Accessories

The more devices you have to carry with you for emergencies, the more likely you are to forget one of them or forget to charge them. What if it was just one single emergency device? That’s much easier than trying to juggle several.

The AstroAI S8 Air Jump Starter with Air Compressor instantly impressed me by combining:

AstroAI S8 on car hood.
  • Air compressor – perfect for low or flat tires
  • Jump starter – easily jumpstart a dead battery
  • Flashlight/emergency light – make sure you’re seen if you break down on the side of a dark road
  • Power bank – top off a dead phone to call for assistance
Charging a phone.

All of this is packed into a compact, durable case weighing 2.4 pounds and measuring just 2.5″D x 5.12″W x 8.67″H. So, yes, it’ll fit nicely in your glovebox, under a seat, or in a corner of your trunk. If you have an emergency kit in your trunk, just store this in it.

Ultra Fast Inflation for Car Tires and More

The AstroAI S8 Air Jump Starter with Air Compressor is incredibly easy to use. Honestly, it’s intuitive enough that you don’t even need the instructions, but the instructions are handy for ensuring you’re doing everything right.

The 150PSI air compressor has five preset modes to inflate car/truck tires, motorcycles, bikes, balls, or another tire of your choice. You also get three units to choose from, including PSI, kPa, and Bar. The default setting is PSI for car/truck.

Pumping up a car tire.

What was most impressive is just how quickly the air compressor feature works. All four of my car tires were low. The actual inflation time took around a minute for nine pounds of air. The pump delivers 25L/min for ultra fast inflation. It can inflate a tire from 0-36PSI in just under six minutes.

Before you pump up a tire, ball, or anything else, set your max limit. Then, connect the hose, turn on the inflator, and wait. It automatically stops when it reaches your set limit. I love not having to monitor the process and leaving it up to chance that I manually stop it at the right moment.

On a full charge, you can pump up a basketball over 150 times and top off an average car tire roughly 21 times.

Quickly Jumpstart Most Consumer Vehicles

Your car won’t start, and you’re stuck on the side of the road at night? Just grab the AstroAI S8 Air Jump Starter with Air Compressorr. The user manual recommends having the device charged to at least 75 percent for best results. The 1500A jump starter works with most vehicles, including:

AstroAI S8 jumper cables.
  • 2.5L Cars
  • 5L SUVs
  • 6L Trucks
  • 12V Lawnmowers
  • 1.5L Motorcycles
  • 12V Teardrop trailers

Essentially, it works with most all 12V batteries, and it’s rated for up to 6L gas powered and 3L diesel engines.

On a full charge, you can get up to 20 jumpstarts, and it’s much easier to use than long jumper cables that are usually tangled up in the bottom of your trunk.

Cables connected to car battery.

The short jumper cables connect to the AstroAI S8 Air Jump Starter with Air Compressor. And don’t worry if you’re not sure which battery terminal to connect to which color. A small box indicates whether you have the connectors in the correct positions. A green light means you’re good to go. It’s a nice safety feature that also makes this more user-friendly.

Confirmation light for jump starter on AstroAI S8.

Simple Controls With Easy-to-Read Screen

As mentioned earlier, the AstroAI S8 Air Jump Starter with Air Compressor is designed to be user-friendly. You only need to master five buttons:

  • Turn the light off and switch between light modes
  • Plus/minus buttons to adjust the pressure settings
  • Cycle through air compressor modes
  • Power button to turn the device on/off and turn the compressor on/off
AstroAI S8 jump starter buttons.

The bright 2.4-inch LED screen is easy to read even in sunlight. The display showcases the current battery level, real-time readings when connected to a tire, and desired settings.

AstroAI S8 display

While using it in the middle of the day in the sun, I can tell you firsthand that it’s easy to read no matter what the lighting conditions are.

Designed With Portability in Mind

I know this may not seem like a big deal, but the AstroAI S8 Air Jump Starter with Air Compressor is designed specifically with portability in mind. Everything except the jumper cables connect conveniently to the back of the device. This includes the alternate nozzle for inflating balls. This also keeps the hose safe versus getting tangled, bent, or torn from tossing it into a storage bag or case.

Storage for air hose and nozzles.

I do have to admit the hose itself is incredibly short. I know this is for convenience and portability, but in many cases, it’s too short for the AstroAI S8 to sit on the ground while inflating tires. This is the only issue I encountered during my review.

A drawstring bag is included to store the device and the jumper cables. It’s nice not having to find a bag or case myself.

Naturally, don’t try to store the device right after using it. The device does get warm after jumpstarting and the air nozzle gets hot after inflating. The manual recommends letting the device cool after 10 minutes of consecutive use.

Though it is easy to grip, I’d love a handle, but that’s just me being picky.

Built-in Safety Features for Peace of Mind

The AstroAI S8 Air Jump Starter with Air Compressor has quite a few built-in safety features, such as:

  • ABS housing to protect during accidental drops
  • Extreme temperature protection (-4 to 140 degrees Farenheit)
  • Overcharge and over discharge protection
  • Reverse polarity
  • Reverse connection prevention
  • Over voltage protection
  • Spark-proof
  • Over-current protection
  • Short circuit protection
  • Overload protection

There’s also an included flashlight. It’s located at the top of the device, illuminating tires or under the hood while you use the device. You can also set it to SOS or strobe mode so that other drivers can see you in the dark.

Flashlight on AstroAI S8.

Long-Lasting Battery

The 10,000mAh battery capacity means the AstroAI S8 Air Jump Starter with Air Compressor lasts for a while between charges. You could jumpstart your car several times, top off your tires, and even charge your phone and still have at least 25 to 50 percent battery remaining.

Just to make sure you’re not left stranded, I’d suggest charging the device at least once per month. And, if you use it frequently, top it off after use just to be safe.

Ideal for Your Vehicle Emergency Kit

Personally, this is going to live in my vehicle emergency kit. You never know when your battery might die, you need a flashlight, or a tire is low. Plus, we’ve all forgotten to charge our phone, then needed it at the worst possible time. This covers all the bases and doesn’t take up much space in your vehicle.

AstroAI S8 Jump Starter and box next to tire.

Sure, the air hose could be longer, but the device inflates so quickly, it’s not really a problem holding it.

Pick up the AstroAI S8 Air Jump Starter with Air Compressor for 37% off.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Crystal Crowder Avatar