Imagination becomes reality when you create innovative designs with the Creality Falcon2 Pro laser engraver. And, with Halloween right around the corner, your eeriest ideas can now take form for the spookiest party decor, cute candy boxes, and more.
The content contained in this article was sponsored by Creality. Although this article is promotional and contains no opinions, Make Tech Easier did a thorough fact-check to ensure accuracy.
The Scariest Part – Some Assembly Required
The ultra well-packaged Creality Falcon2 Pro laser engraver does require some assembly when it arrives. However, it’s not nearly as scary as it sounds. Simply follow the detailed user manual or video guide, and you’ll have your engraver up and running in less than 10 minutes.
Outside of the assembly itself, you also need to calibrate the camera lens within LightBurn (a free trial is available), although it is also compatible with LaserGRBL (completely free). Once again, the user manual takes you step by step on how to do this to ensure the best possible experience when you start your first engraving.
Safe for the Naked Eye
While you should always wear safety glasses if the Creality Falcon2 Pro isn’t covered, this laser engraver has a deep red cover that sports an FDA Class 1 safety certification. In layman’s terms, you can look at it while the laser’s in action without glasses. There’s even a built-in stop feature if the cover is removed mid-project.
The cover also includes a top camera for the most accurate alignment possible. The Pilot Technology lets you take full advantage of the entire frame, offering even more possibilities versus standard laser engraver covers.
The red keeps your eyes safe but gives you a full view of everything going on. Instead of just a small window, you see the entire project in progress throughout.
The buttons are located outside the cover, without the need to lift the cover to pause or make adjustments.
When you’re ready to place or remove materials, the curved cover slides back easily to give you access without removing the entire cover.
Impressive Cutting Power for Faster Projects With a Variety of Materials
Have a great idea but hate waiting? The real-time preview and one-click picture output let you fully enjoy the power of the 40W diode laser in the spacious 400mm x 415mm work area. The engraver is also compatible with the 20W laser module.
The Creality Falcon2 Pro 40W laser engraver works well with cardboard, wood, bamboo, leather, fabric, rubber, acrylic, metal, plastic, and more. What’s most impressive is that the engraver cuts through 20mm basswood in just one pass. It can even handle 0.15mm stainless steel sheets.
Imagine what you could cut out. A cute countdown calendar, spider bookends, or even a 3D pumpkin.
Need multiples of the same piece? Forget setting up each individual component. Instead, set up batch projects. Or, if you need a small, quick item like a keychain, cut and engrave it in minutes.
Depending on your material, you may want to adjust the fence type protection strip. The special oxidation process creates a visually stunning, wear-resistant finish that filters smoke. But it can be used as a stand or flat for more flexible materials.
Creality Falcon2 Pro 40W Laser Engraver
Safety Comes First, So Don’t Worry
With such a powerful laser, you may worry about something going wrong. But Creality puts safety first. The protective cover is just one of many built-in safety features, such as:
- Airflow monitoring
- Lens monitoring
- Flame monitoring
- Auto-shut off if cover is moved
With built-in monitoring systems, simply pay attention to the lights to know when there is an issue.
Air Assist for Cleaner Projects
An air assist module automatically provides an extra push to help with cleaner cuts or a weaker airflow when engraving. While you can engrave without it, I’d highly recommend using it for much more perfect cuts and engraving.
Breathe Easily With the Built-in Air Purification System
As you know, laser engravers generate quite a bit of smoke, especially with certain materials like wood. The built-in air purification system on the Creality Falcon2 Pro 40W engraver turns the fan on automatically (you can also manually turn it on) to send smoke out of the machine. An air hose filters it outside. You can also opt for an air purifier, which is sold separately.
Handy Drawer Design Makes Cleanup Easy
With most laser engravers, any debris falls through the cutting board onto whatever table or counter you’re using. With the Creality Falcon2 Pro, a drawer catches all the mess. Simply slide it out when you’re finished, and dump the debris. It’s one of the easiest machines to clean.
Ideal for Hobbyists and Businesses
The compact size and enclosed design make this the perfect laser engraver for small spaces. Add it to your craft room to create quick, imaginative designs. Or, add it to a small business to create branded projects with ease.
The great part is that you can use the laser engraver with a computer via USB cable or completely offline with an SD card. With the latter, create projects in LaserGRBL or Lightburn, and move them to the SD card. Pop in the card on the engraver, choose your project, and you’re all set.
Spooky Savings With Free Treats
To celebrate the season, Creality is offering some seriously spooky savings with the Halloween Laser Engraving Bonanza. On the Creality Falcon2 Pro 40W laser engraver, enjoy $780 off, making the machine just $1,119. After the discount expires on November 2, you can get a separate deal using the code FNPALL10.
You also get free goodies. Every purchase nets you free Halloween sparkle paper (valued at $13.90). Spend over $399 and get six round coasters and 10 8-in. wood boards (valued at $35.98). Spend over $699, and you’ll also get six brown wooden sheets, four leather patches, and 50 sheets of glow scratch paper.
