With everyone spending much more time at home than they planned, many people are coming up with projects they previously didn’t have time for. To help you with some of your projects, consider getting a Selpic Star A 3D Printer that will give you a smooth, professional printing experience.
This 3D printer applies direct extrusion technology, avoiding filament stringing, leading to better extrusion. The brass nozzle can keep the extrusion process smooth because of the inner wall, thermal conductivity, and temperature control.
The accuracy of the X-axis and Y-axis on the Selpic Star A 3D Printer can reach 100 μm with a Z-axis accuracy of 50 μm. The printer allows you a resolution of ±0.1 mm with a 0.1 to 0.2 mm of layer thickness. The smooth surfaces and precise details will make your work come to life.
Just three simple steps will install the Star A printer. It only requires you to tighten some screws, connect a couple of cables, and ready the filament. The first time you do it, it will take only 15 minutes, a piece of A4 paper, and four-button operation for you to start printing your first project.
The Star A is 10.2″ x 9.4″ x 9.8″ and weighs just 4.4 pounds, not taking up much space and allowing it to be easily moved. It’s quiet, with a low-noise motor below 60dB. If you have a power outage, the printer will resume printing from where it left off, saving filaments. A heated bed, touch screen, and laser engraving can be added.
The website shows a savings of $10 on the printer. Through December 25, once you add it to your cart, you can save an additional 20%, paying just $151.20 through December 25.
Make Tech Easier may earn commission on products purchased through our links, which supports the work we do for our readers.
